| 逯祥洲,侯 明,谢彦飞,邓 娇,王一靓,张永超,方 亮,温泰斗,董亚东.联轴器楔形橡胶块的硫化工艺研究[J].橡胶科技,2025,23(3):0146-0150. |
二维码（扫一下试试看！） |
| 联轴器楔形橡胶块的硫化工艺研究 |
| Study on Vulcanization Process of Wedge-shaped Rubber Block for Coupling |
| 投稿时间：2024-01-30 修订日期：2024-01-30 |
| DOI：10.12137/j.issn.2095-5448.2025.03.0146 |
| 中文关键词: 楔形橡胶块 骨架表面处理 硫化工艺 仿真分析 |
| 英文关键词: wedge-shaped rubber block skeleton surface treatment vulcanization process simulation analysis |
| 基金项目: |
| 中图分类号: |
|
| 摘要点击次数: 222 |
| 全文下载次数: 100 |
| 中文摘要: |
| 研究轨道车辆D360联轴器楔形橡胶块的硫化工艺。对楔形橡胶块骨架喷砂、除尘、涂胶等工序进行了针对性的优化，金属与橡胶粘接良好；采用Sigmasoft软件对楔形橡胶块的硫化时间和硫化温度进行精细化仿真，得出在143 ℃下硫化30 min时，楔形橡胶块性能稳定，外观及性能满足设计及使用要求。 |
| 英文摘要: |
| The vulcanization process of wedge-shaped rubber block for D360 coupling of rail vehicle were studied.The targeted optimization were carried out on the sandblasting，dust removal，and glue coating processes of the wedge-shaped rubber block skeleton，and the bonding property between metal and rubber was good.The fine simulation of the vulcanization time and vulcanization temperature of wedge-shaped rubber blocks was carried out using Sigmasoft software，and it was found that after vulcanized for 30 minutes at 143 ℃，the appearance and performance of the wedge-shaped rubber block were stable and met the design and usage requirements. |
|
|
查看全文
查看/发表评论 下载PDF阅读器 |
