文章摘要
别龙娇,余本超,徐雨俊,郝方太,王滕滕,王玮.聚四氟乙烯微粉/氯丁橡胶复合材料的性能研究[J].橡胶科技,2025,23(5):0260-0264. 本文二维码信息
二维码(扫一下试试看!)
聚四氟乙烯微粉/氯丁橡胶复合材料的性能研究
Study on Properties of Polytetrafluoroethylene Micro Powder/Chloroprene Rubber Composite
投稿时间:2024-08-27  修订日期:2024-08-27
DOI:10.12137/j.issn.2095-5448.2025.05.0260
中文关键词: 聚四氟乙烯微粉  氯丁橡胶  复合材料  力学性能  耐磨性能
英文关键词: PTFE micro powder  CR  composite  mechanical property  abrasion resistance
基金项目:宁波市重大科技攻关暨“揭 榜挂帅”项目(2022Z004);浙江省公益技术应用研究项目(LGG22E030014);青年科技创新领军人才项目(2023QL045);宁波市公益项目重点项目(202002N3123);
中图分类号:
作者单位E-mail
别龙娇 宁波裕江特种胶带有限公司 1903864448@qq.com 
余本超 浙大宁波理工学院  
徐雨俊 宁波裕江特种胶带有限公司  
郝方太 宁波裕江特种胶带有限公司  
王滕滕 宁波裕江特种胶带有限公司  
王玮* 浙大宁波理工学院 ww@nit.net.cn 
摘要点击次数: 125
全文下载次数: 69
中文摘要:
      将等离子体处理过的聚四氟乙烯(PTFE)微粉填充到氯丁橡胶(CR)中制得CR/PTFE复合材料,研究PTFE微粉用量对复合材料微观形貌及性能的影响。结果表明:添加PTFE微粉对复合材料断面的微观形貌没有明显影响;添加PTFE微粉后,复合材料的门尼粘度均下降,热稳定性变化不大,硬度略减小,拉伸强度略有增大,拉断伸长率显著增大,耐磨性能提高;PTFE微粉最佳用量为4份。
英文摘要:
      CR/PTFE composites were obtained by filling plasma treated polytetrafluoroethylene(PTFE) micro powder in chloroprene rubber(CR).The effect of PTFE micro powder dosage on the microstructure and properties of the composites was studied.The results showed that the addition of PTFE micro powder had no significant effect on the cross-sectional micro morphology of the composites.The addition of PTFE micro powder resulted in a decrease in Mooney viscosity of the composites,the thermal stability changed little,the hardness slightly decreased,the tensile strength slightly increased,the elongation at break significantly increased,and the wear resistance was improved.The optimal dosage of PTFE micro powder was 4 phr.
Author NameAffiliationE-mail
BIE Longjiao Ningbo Yujiang Special Rubber Belts Co,Ltd 1903864448@qq.com 
YU Benchao NingboTech University  
XU yujun Ningbo Yujiang Special Rubber Belts Co,Ltd  
HAO Fangtai Ningbo Yujiang Special Rubber Belts Co,Ltd  
WANG Tengteng Ningbo Yujiang Special Rubber Belts Co,Ltd  
WANG Wei NingboTech University ww@nit.net.cn 
查看全文   查看/发表评论  下载PDF阅读器