| 何 菁,王兆龙,张凯凯,王龙庆,李慧敏,孙晓峰.试验因素对轮胎侧偏特性的影响[J].橡胶科技,2025,23(1):0047-0051. |
二维码（扫一下试试看！） |
| 试验因素对轮胎侧偏特性的影响 |
| Effect of Test Factors on Tire Cornering Characteristics |
| 投稿时间：2023-10-20 修订日期：2023-10-20 |
| DOI：10.12137/j.issn.2095-5448.2025.01.0047 |
| 中文关键词: 轮胎 侧偏特性 负荷 充气压力 测试轮辋 |
| 英文关键词: tire cornering characteristic verticle load inflation pressure test rim |
| 基金项目: |
| 中图分类号: |
|
| 摘要点击次数: 451 |
| 全文下载次数: 303 |
| 中文摘要: |
| 研究测试过程中负荷、充气压力和测试轮辋对轮胎侧偏特性的影响。结果表明：不同规格轮胎侧偏刚度均随负荷增大而增大，前期几乎呈线性变化，后期增大减缓；不同充气压力下轮胎侧偏刚度随负荷变化曲线存在交点，扁平比越低，出现交点的负荷越大；增大轮辋宽度时，轮胎刚性增大，扁平比越高，轮胎侧偏刚度增幅越大。因此应严格控制试验条件，保证试验数据的准确性和有效性。 |
| 英文摘要: |
| The effect of the inflation pressure，vertical load and test rim during the testing process on tire cornering characteristic was investigated.The results showed that the cornering stiffness of different specifications tires increased with the increase of load，showing almost linear changes in the early stage and slowing down in the later stage.There were intersection points in the curve of tire cornering stiffness with load variation under different inflation pressures，and the lower the flatness ratio was，the greater the load at the intersection point was.When increasing the width of the wheel rim，the tire rigidity increased，and the higher the flatness ratio was，the greater the increase in tire cornering stiffness was.So the test conditions should be strictly controlled to ensure the accuracy and validity of test data. |
|
|
查看全文
查看/发表评论 下载PDF阅读器 |
