| 赵明明,韩国幸,张凯凯,王龙庆.硫化后充气工艺对子午线轮胎性能的影响[J].橡胶科技,2024,22(11):0646-0649. |
二维码（扫一下试试看！） |
| 硫化后充气工艺对子午线轮胎性能的影响 |
| Effect of Post-cure Inflation Process on Radial Tire Performance |
| 投稿时间：2023-09-11 修订日期：2023-09-11 |
| DOI：10.12137/j.issn.2095-5448.2024.11.0646 |
| 中文关键词: 子午线轮胎 硫化后充气 外直径 断面宽 接地印痕 滚动阻力 侧偏性能 |
| 英文关键词: radial tire post-cure inflation outer diameter section width footprint rolling resistance cornering characteristic |
| 基金项目: |
| 中图分类号: |
|
| 摘要点击次数: 366 |
| 全文下载次数: 121 |
| 中文摘要: |
| 研究硫化后充气时间和压力对轮胎性能的影响。结果表明，延长后充气时间和增大后充气压力会提升初始状态轮胎的外直径和断面宽。后充气时间和压力在不同范围内对轮胎静态接地印痕参数和径向刚度的影响规律不同。从无后充气到有后充气，滚动阻力系数减小；继续延长后充气时间和增大压力，滚动阻力系数不会继续减小。从无后充气到有后充气，侧偏刚度增大，回正刚度减小；随着后充气压力增大，侧偏刚度和回正刚度均增大；后充气时间对侧偏刚度和回正刚度的影响在不同后充气压力下呈现不同的规律。 |
| 英文摘要: |
| The effects of post-cure inflation time and pressure on tire performance were studied.The results showed that increasing post-cure inflation time and pressure could increase the initial outer diameter and section width of tire.The effects of post-cure inflation time and pressure in different ranges on static footprint parameters and radial stiffness were different.The rolling resistance coefficient decreased from no post-cure inflation to post-cure inflation，while it could not continue to decrease if the post-cure inflation time and pressure continued to increase.From no post-cure inflation to post-cure inflation，the cornering stiffness increased and the aligning stiffness decreased.With the increase of post-cure inflation pressure，the cornering stiffness and aligning stiffness both increased.The influence of post-cure inflation time on cornering stiffness and aligning stiffness showed different laws under different post-cure inflation pressures. |
|
|
查看全文
查看/发表评论 下载PDF阅读器 |
