| 雷 振,田巍娟,景永博,余天笠,雷泰伟,郑 艳.全钢载重子午线轮胎胎面挤出质量缺陷原因分析及解决措施[J].橡胶科技,2024,22(9):0524-0527. |
二维码（扫一下试试看！） |
| 全钢载重子午线轮胎胎面挤出质量缺陷原因分析及解决措施 |
| Causes Analysis and Solution Measures for Extrusion Quality Defects in Tread of Truck and Bus Tires |
| 投稿时间：2023-08-21 修订日期：2023-08-21 |
| DOI：10.12137/j.issn.2095-5448.2024.09.0524 |
| 中文关键词: 全钢载重子午线轮胎 胎面 挤出 质量缺陷 口型设计 |
| 英文关键词: all steel radial load tires tread extrusion quality defects die design |
| 基金项目: |
| 中图分类号: |
|
| 摘要点击次数: 704 |
| 全文下载次数: 416 |
| 中文摘要: |
| 分析全钢载重子午线轮胎挤出胎面尺寸不稳定、胎面脱层、气孔率大、长度不达标等质量缺陷产生的原因，通过对胶料的混炼质量控制、口型设计的优化、设备和工艺过程的优化控制等措施，减少了胎面挤出质量，提高了部件合格率，有效减少返回胶，降低成本。 |
| 英文摘要: |
| The causes of quality defects such as unstable tread size，delamination，high porosity，and unqualified length during the tread extrusion process of all-steel truck and bus radial tires were analyzed.Through measures such as controlling the mixing quality of the compound，optimizing the die design，optimizing the process control，the extrusion quality defects of the tread were reduced，the qualification rate were increased，and the return compound was effectively reduced，reducing energy consumption. |
|
|
查看全文
查看/发表评论 下载PDF阅读器 |
