| 邓世涛,边慧光,刘自光,赵 阳,赵 闯.湿法混炼胶料性能研究[J].橡胶科技,2024,22(9):0520-0523. |
二维码（扫一下试试看！） |
| 湿法混炼胶料性能研究 |
| Study on Properties of Compound Mixed by Wet Mixing Process |
| 投稿时间：2023-06-26 修订日期：2023-06-26 |
| DOI：10.12137/j.issn.2095-5448.2024.09.0520 |
| 中文关键词: 湿法混炼工艺 干法混炼工艺 轮胎 滚动阻力 耐磨性能 |
| 英文关键词: wet mixing process dry mixing process tire rolling resistance wear resistance |
| 基金项目: |
| 中图分类号: |
|
| 摘要点击次数: 871 |
| 全文下载次数: 377 |
| 中文摘要: |
| 研究对比采用湿法混炼工艺和干法混炼工艺的混炼胶性能和成品轮胎性能。结果表明：湿法混炼工艺不仅能提高填料在橡胶基体中的分散性，而且环保、生产周期短、能耗低；与干法混炼胶料相比，湿法混炼胶料的300%定伸应力、撕裂强度和耐磨性能等都有不同程度的提高；胎面采用湿法混炼胶料的成品轮胎的滚动阻力降低，耐磨性能提高。 |
| 英文摘要: |
| The properties of compound mixed by wet mixing process and dry mixing process and the performance of corresponding finished tires were studied and compared.The results showed that the wet mixing process not only improved the dispersion of fillers in rubber matrix，but also had the advantages of environmental protection，short production cycle and low energy consumption.Compared with the dry process mixed compound，the modulus at 300% elongation，tear strength，wear resistance and of the wet process mixed compound were improved with different degrees.The rolling resistance of the finished tires with tread using wet process mixed compound was reduced，and wear resistance was improved. |
|
|
查看全文
查看/发表评论 下载PDF阅读器 |
