文章摘要
骆立刚,丁宏亮,唐立成,李毅,陈晨.合成乳胶海绵的热老化行为研究[J].橡胶科技,2022,20(10):0480-0483. 本文二维码信息
二维码(扫一下试试看!)
合成乳胶海绵的热老化行为研究
Study on Thermal Aging Behavior of Synthetic Latex Sponges
投稿时间:2022-03-10  修订日期:2022-03-10
DOI:10.12137/j.issn.2095-5448.2022.10.0480
中文关键词: 合成乳胶海绵  耐热老化性能  黄度指数  白度指数  交联密度
英文关键词: synthetic latex sponge  heat aging resistance  yellowness index  whiteness index  crosslinking density
基金项目:浙江省市场监管局质量技术基础建设项目(NQI 20200116和NQI 20190117)
中图分类号:
作者单位E-mail
骆立刚* 浙江省轻工业品质量检验研究院 camel5017@sina.com 
丁宏亮 浙江省建工集团有限责任公司  
唐立成 浙江省轻工业品质量检验研究院  
李毅 浙江省建工集团有限责任公司  
陈晨 中国计量大学质量与安全工程学院  
摘要点击次数: 1043
全文下载次数: 431
中文摘要:
      采用加速老化试验对合成乳胶海绵的热老化行为进行研究,考察了热氧老化前后的表面形貌、黄度和白度指数、交联密度及傅里叶红外光谱。结果表明:随老化时间的延长,合成乳胶海绵的多孔结构被破坏,当老化时间为48 d时,合成乳胶海绵部分大孔结构被破坏,其他孔结构完整;老化48 d后,合成乳胶海绵的黄度指数由11.74增大至42.73,白度指数由88.38减小至77.81,黄度变化大于白度变化;由黄度指数和白度指数表征的合成乳胶海绵老化速率分别为0.702 3·d-1和0.227 2·d-1;由交联密度表征的合成乳胶海绵老化速率为2.708 2×10-5 mol·cm-3·d-1;在热氧老化过程中,合成乳胶海绵发生了加成和氧化反应。
英文摘要:
      The thermal aging behavior of synthetic latex sponge was studied by accelerated aging test,and the surface morphology,yellowness and whiteness index,cross-linking density and FTIR spectrum before and after thermal-oxidative aging were investigated. The results showed that with the prolonging of aging time,the porous structure of the synthetic latex sponge was destroyed. When the aging time was 48 d,part of the macroporous structure of the synthetic latex sponge was destroyed and other pore structures were intact. After aging for 48 d,the yellowness index of the synthetic latex sponge increased from 11. 74 to 42. 73 and the whiteness index decreased from 88. 38 to 77. 81,and the change of yellowness was greater than the change of whiteness. The aging rates of synthetic latex sponges characterized by yellowness index and whiteness index were 0. 702 3·d-1 and 0. 227 2·d-1,respectively. The aging rate of synthetic latex sponge characterized by crosslink density was 2. 708 2×10-5 mol·cm-3·d-1. During the thermal aging process,the synthetic latex sponge underwent addition and oxidation reactions.
Author NameAffiliationE-mail
LUO Ligang Zhe jiang Institute of Quality Inspection for Light Industrial Products camel5017@sina.com 
DING Hongliang Zhejiang Construction Engineering Group Co,Ltd  
TANG Licheng Zhe jiang Institute of Quality Inspection for Light Industrial Products  
LI Yi Zhejiang Construction Engineering Group Co,Ltd  
CHEN Chen College of Quality and Safety Engineering,China Jiliang University  
查看全文   查看/发表评论  下载PDF阅读器