| 孙阿超,王波,孙艳妮,李祥婷,和燕.硫化橡胶低温脆性单试样测定方法的研究[J].橡胶科技,2021,19(9):0460-0462. |
二维码（扫一下试试看！） |
| 硫化橡胶低温脆性单试样测定方法的研究 |
| Study on Single Test Piece Method of Low Temperature Brittleness of Vulcanizate |
| 投稿时间：2021-01-28 修订日期：2021-01-28 |
| DOI：10.12137/j.issn.2095-5448.2021.09.0460 |
| 中文关键词: 硫化胶 脆性温度 裁切方向 搅拌 单试样法 多试样法 国家标准 |
| 英文关键词: vulcanizate brittleness temperature cutting direction stir single test piece method multiple test piece method national standard |
| 基金项目: |
| 中图分类号: |
|
| 摘要点击次数: 1540 |
| 全文下载次数: 891 |
| 中文摘要: |
| 研究硫化橡胶低温脆性的测定方法。试样裁切方向会影响硫化胶脆性温度的测定结果。建议在GB/T 1682—2014修订时应该考虑试样裁切方向和试样冷冻期间搅拌的影响。明确了在给定脆性温度限值时的试验结果判定方法，对橡胶制品的低温脆性检测具有一定的指导意义。 |
| 英文摘要: |
| The determination method of low temperature brittleness of vulcanizate was studied.The cutting direction of the sample would affect the determination results of the brittleness temperature of vulcanizate.It was suggested that the influence of cutting direction of sample and stirring during freezing should be considered in the revision of the national standard GB/T 1682—2014.The method of judging the test results at the given limit of brittleness temperature was defined，which was of certain significance for the low temperature brittleness detection of rubber products. |
|
|
查看全文
查看/发表评论 下载PDF阅读器 |
