| 徐岩,屈东山,王传磊,潘恩华,邵长城,郑涛.2＋2×0.32ST超高强度钢丝帘线在半钢子午线轮胎带束层中的应用[J].橡胶科技,2021,19(2):0076-0078. |
二维码（扫一下试试看！） |
| 2＋2×0.32ST超高强度钢丝帘线在半钢子午线轮胎带束层中的应用 |
| Application of 2＋2×0.35HT Ultra High Strength Steel Cord in Belt of Semi-Steel Radial Tire |
| 投稿时间：2020-09-18 修订日期：2020-09-18 |
| DOI：10.12137/j.issn.2095-5448.2021.02.0076 |
| 中文关键词: 半钢子午线轮胎 带束层 钢丝帘线 强度性能 滚动阻力 |
| 英文关键词: semi-steel radial tire belt steel cord strength performance rolling resistance |
| 基金项目: |
| 中图分类号: |
|
| 摘要点击次数: 2096 |
| 全文下载次数: 6 |
| 中文摘要: |
| 研究2＋2×0.32ST钢丝帘线替代2＋2×0.35HT钢丝帘线在半钢子午线轮胎带束层中的应用。结果表明：与2＋2×0.35HT钢丝帘线相比，2＋2×0.32ST钢丝帘线的强度更高，直径更小、耐疲劳性能更好；在轮胎带束层中用2＋2×0.32ST钢丝帘线替代2＋2×0.35HT钢丝帘线后，工艺性能良好，成品轮胎的充气外缘尺寸变化不大，强度性能、高速性能、耐久性能和耐水压性能均能满足设计和国家标准要求，滚动阻力降低，同时有效减小了轮胎中的钢丝帘线和胶料用量，降低了生产成本。 |
| 英文摘要: |
| The application of 2＋2×0.32ST steel cord instead of 2＋2×0.35HT steel cord in belt of semi-steel radial tire was studied.Compared with 2＋2×0.35HT steel cord，2＋2×0.32ST steel cord had higher strength，smaller diameter and better fatigue resistance.When 2＋2×0.32HT steel cord was replaced by 2＋2×0.32ST steel cord in belt，the process performance was good，the inflated peripheral dimention of finished tire changed little，the strength performance，high speed performance，durability and water pressure resistance could meet the design and national standards requirements，and the rolling resistance was reduced.At the same time，the amount of steel cord and rubber compound in the tire were effectively reduced，and the production cost was reduced. |
| Author Name | Affiliation | E-mail | | XU Yan | Shandong Fengyuan Tire Manufacturing Co.,ltd., | 973833799@qq.com | | QU Dongshan | Shandong Fengyuan Tire Manufacturing Co.,ltd., | | | WANG chuanlei | Shandong Fengyuan Tire Manufacturing Co.,ltd., | | | PAN Enhua | Shandong Fengyuan Tire Manufacturing Co.,ltd., | | | SHAO Changcheng | Shandong Fengyuan Tire Manufacturing Co.,ltd., | | | ZHENG Tao | Shandong Fengyuan Tire Manufacturing Co.,ltd., | |
|
|
查看全文
查看/发表评论 下载PDF阅读器 |
