| 赵翔,赵玉娜,宋美芹,张宝亮,高同舜,邱云学.3＋9×0.175NT钢丝帘线在轻型载重子午线轮胎胎体中的应用[J].橡胶科技,2020,18(1):0034-0036. |
二维码（扫一下试试看！） |
| 3＋9×0.175NT钢丝帘线在轻型载重子午线轮胎胎体中的应用 |
| Application of 3＋9×0.175NT Steel Cord in Carcass of Light Truck Radial Tire |
| 投稿时间：2019-08-29 修订日期：2019-08-29 |
| DOI：10.12137/j.issn.2095-5448.2020.01.0034 |
| 中文关键词: 轻型载重子午线轮胎 胎体 钢丝帘线 聚酯帘线 |
| 英文关键词: light truck radial tire carcass steel cord polyester cord |
| 基金项目: |
| 中图分类号: |
|
| 摘要点击次数: 2788 |
| 全文下载次数: 5 |
| 中文摘要: |
| 研究3＋9×0.175NT钢丝帘线在轻型载重子午线轮胎胎体中的应用。结果表明，采用1层压延密度为83根·dm-1的3＋9×0.175NT钢丝帘布替代3层压延密度为110根·dm-1的1670dtex/2-28EPI聚酯帘布用于6.50R16 10PR轻型载重子午线轮胎胎体，压延工艺良好，成型和硫化过程正常。成品轮胎质量减小，成本降低，充气外缘尺寸、强度性能、耐久性能和高速性能均符合国家标准或企业标准要求。 |
| 英文摘要: |
| The application of 3＋9×0.175NT steel cord in the carcass of light truck radial tire was studied.The results showed that，using one layer of 3＋9×0.175NT steel cord with the calendering density of 83 pieces per decimetre to replace three layers of 1670dtex/2-28EPI polyester cord with the calendering density of 110 pieces per decimetre in the carcass of 6.50R16 10PR light truck radial tire，the calendering process was good，the forming and curing process were normal.The weight and cost of finished tire were reduced，the inflated peripheral dimension，strength，endurance and high speed performance met the requirements of national standards or enterprise standards. |
|
|
查看全文
查看/发表评论 下载PDF阅读器 |
