| 张杰.基于有限元仿真的汽车尾门密封条结构分析[J].橡胶科技,2019,17(11):0612-0615. |
二维码（扫一下试试看！） |
| 基于有限元仿真的汽车尾门密封条结构分析 |
| Structural Analysis of Automotive Tailgate Sealing Strip Based on Finite Element Simulation |
| 投稿时间：2019-04-24 修订日期：2019-04-24 |
| DOI：10.12137/j.issn.2095-5448.2019.11.0612 |
| 中文关键词: 汽车尾门 密封条 有限元分析 压缩负荷 结构优化 |
| 英文关键词: automobile tailgate sealing strip finite element analysis compression load structural optimization |
| 基金项目: |
| 中图分类号: |
|
| 摘要点击次数: 1791 |
| 全文下载次数: 463 |
| 中文摘要: |
| 结合有限元分析软件MSC. MARC对某车型汽车尾门密封条进行结构分析与优化。通过对初步设计的电动尾门密封条结构进行压缩负荷有限元模拟分析，并优化调整截面结构，改变压缩负荷，使其满足设计要求。该方法可缩短研发周期，提高工作效率。 |
| 英文摘要: |
| The structural analysis and optimization of the tailgate seal strip of a vehicle were carried out with finite element analysis software MSC. MARC. Through finite element analysis of compression load
for pre-designed electric tailgate seal strip structure，the section structure was optimized，and the optimized compression load met the design requirement. This method could shorten the development cycle and improve the work efficiency. |
|
|
查看全文
查看/发表评论 下载PDF阅读器 |
