| 庄玉森,高卫东.355/65－15 24PR TL E-3低断面无内胎重型动力平板运输车轮胎的设计[J].橡胶科技,2017,15(5):40-43. |
二维码（扫一下试试看！） |
| 355/65－15 24PR TL E-3低断面无内胎重型动力平板运输车轮胎的设计 |
| Design of 355/65－15 24PR TL E-3 Low Profile Tubeless Heavy Duty Flatbed Truck Tire |
| |
| DOI： |
| 中文关键词: 平板运输车轮胎 工业车辆轮胎 结构设计 施工设计 |
| 英文关键词: flatbed truck tire industrial vehicle tire structural design construction design |
| 基金项目: |
| 中图分类号:TQ336.1＋1 |
|
| 摘要点击次数: 727 |
| 全文下载次数: 275 |
| 中文摘要: |
| 介绍355/65—15 24PR TL E-3低断面无内胎重型动力平板运输车轮胎的设计情况。结构设计：外直径 806 mm，断面宽度 362 mm，行驶面宽度 328 mm，行驶面弧度高 4.6 mm，胎圈着合直径 385.5 mm，胎圈着合宽度 247.5 mm，断面水平轴位置（H1/H2） 1.333，采用高通过性块状花纹，花纹深度 22.5 mm，花纹周节数 24。施工设计：胎面采用三方五块结构，胎体和缓冲层分别采用12层1400dtex/3和2层930dtex/2V3锦纶66帘布，胎圈采用双钢丝圈结构；轮胎成型采用指形正包、胶囊反包成型机，硫化采用双模硫化机。成品轮胎充气外缘尺寸和物理性能满足设计和国家标准要求，实际使用性能良好。 |
| 英文摘要: |
| This paper introduces the design of 355/65—15 24PR TL E-3 low profile tubeless heavy duty flatbed truck tire.In the structure design，the following parameters were taken：outer diameter 806 mm，cross-section width 362 mm，width of running surface 328 mm，arc height of running surface 4.6 mm，bead diameter at rim seat 385.5 mm，bead width at rim seat 247.5 mm，maximum width position of cross-section（H1/H2） 1.333，high through block pattern，pattern depth 22.5 mm，and number of pattern pitches 24.In the construction design，three formulation and five piece structure was used for tread，12 layers of 1400dtex/3 and 2 layer of 930dtex/2V3 nylon 66 cords were applied in the carcass ply and breaker ply，respectively，and double steel ring structure was adopted in bead.The tire was formed on finger-shaped turn-up building machine and cured on press curing machine.The test results showed that the inflated peripheral dimensions and physical properties of the finished tires met the requirements of the design and national standards，and the finished tires showed good performance in practical use. |
|
|
查看全文
查看/发表评论 下载PDF阅读器 |
