| 陈文喜,蒋化学.工程机械轮胎罐式胶囊硫化模具过梁处内压水泄漏的原因分析及解决措施[J].橡胶科技,2015,13(8):36-38. |
二维码（扫一下试试看！） |
| 工程机械轮胎罐式胶囊硫化模具过梁处内压水泄漏的原因分析及解决措施 |
| Root Cause Analysis of Pressurized Water Leakage from OTR Tire Curing Bladder Mold Beam and Corrective Actions |
| |
| DOI： |
| 中文关键词: 内压水泄漏 罐式胶囊硫化 工程机械轮胎 模具 过梁 |
| 英文关键词: pressurized water leakage tire curing bladder OTR tire mold beam |
| 基金项目: |
| 中图分类号: |
|
| 摘要点击次数: 1767 |
| 全文下载次数: 1291 |
| 中文摘要: |
| 分析工程机械轮胎罐式胶囊硫化模具过梁处内压水泄漏（简称内漏）产生的原因，并提出相应的解决措施。通过优化过梁与模具连接、合理设计过梁受力、优化模具密封结构及过梁结构，罐式胶囊硫化模具过梁处内漏问题得到有效解决，轮胎硫化质量提高。 |
| 英文摘要: |
| In this study，the root causes of leakage of pressurized water from OTR tire curing bladder mold beam were analyzed，and corrective actions were presented accordingly.Based on the analysis，the joint of beam and mold was optimized，the beam stress was adjusted，and the mold sealing structure and beam structure were also modified.After the modification，the water leakage issue was effectively resolved and tire curing quality was improved. |
|
|
查看全文
查看/发表评论 下载PDF阅读器 |
