| Simulation of Wrapped V-Belt Based on Finite Element Method and Its Process Structure Parameter Analysis |
| Received:September 10, 2024 Revised:September 10, 2024 |
| DOI：10.12136/j.issn.1000-890X.2026.08.0601 |
| Key Words: wrapped V-belt；finite element simulation；stress-strain；process structure parameter |
| Author Name | Affiliation | E-mail | | YANG Shenglong | Qingdao University of Science and Technology | 18797119590@163.com | | PAN Wandong | Sanlux Co.，Ltd | | | WANG He | Qingdao University of Science and Technology | | | XU Yifan | Qingdao University of Science and Technology | | | DIAO Pengfei | Qingdao University of Science and Technology | | | bianhuiguang* | Qingdao University of Science and Technology | | | wangchuansheng | Key Laboratory of Advanced Manufacturing Technology for Polymer Materials of Shandong Province | |
|
| Hits: 154 |
| Download times: 30 |
| Abstract: |
| The stress-strain state of wrapped V-belt during the tensioning motion was simulated by the finite element method，and the mechanical properties and process structure parameters of V-belt were investigated.The results showed that the largest stress occurred in the rope of V-belt，the smallest stress occurred in the rubber materials（surface compound and base compound），and the maximum strain in the cross-section of the V-belt occurred in the inner layer near the outer side.The effect of the friction coefficient and center distance between wheels （driving wheel and driven wheel） on the of performance V-belt followed a obvious rule，whereas the effect of the driving wheel diameter on the stress and strain of the V-belt did not exhibit a clear rute. |
|
View Full Text
View/Add Comment Download reader |
| Close |
