| Finite Element Analysis of T-Ring Based on Ansys Software |
| Received:April 01, 2023 Revised:April 01, 2023 |
| DOI：10.12136/j.issn.1000-890X.2025.03.0191 |
| Key Words: T-ring；structure parameter；sealing performance；finite element annlysis |
| Author Name | Affiliation | E-mail | | GAO Rongbin* | Guangzhou SINOMACH Sealing Technology Co., Ltd. | 447152923@qq.com | | HUANG Le | Guangzhou SINOMACH Sealing Technology Co., Ltd. | | | LAING Huoshou | Guangzhou SINOMACH Sealing Technology Co., Ltd. | | | GAO Junxiang | Guangzhou Mechanical Engineering Research Institute Co.，Ltd | | | CHEN Qing | Guangzhou Mechanical Engineering Research Institute Co.，Ltd | | | XIAO Fengliang | Guangzhou Mechanical Engineering Research Institute Co.，Ltd | |
|
| Hits: 198 |
| Download times: 71 |
| Abstract: |
| Based on Ansys software，the influence of the structure parameters （the boss width，step height，boss height and outside diameter） of the T-ring （composed of rubber T-ring and retaining rings） on its sealing performance （the radial force，contact width and contact pressure with the shaft） was analyzed using finite element analysis.The results showed that，in the assembly state，the boss height was critical structure parameter affecting the sealing performance of the T-ring.In the pressurized state，both the boss width and boss height were critical structure parameters affecting the sealing performance of the T-ring. |
|
View Full Text
View/Add Comment Download reader |
| Close |
