文章摘要
Optimization on Injection Molding Process Parameters of Rubber Outer Windshield for High-speed Train Based on Orthogonal Test
Received:August 28, 2020  Revised:August 28, 2020
DOI：10.12136/j.issn.1000-890X.2021.03.0168
Key Words: Based on Moldflow software，orthogonal test and response surface method were used to
Author NameAffiliationE-mail
CHEN Mingtong Qingdao University of Science and Technology 1425373799@qq.com 
JIANG Xiaoyan Qingdao AOTAI Transportation Equipment Co,Ltd  
ZHAO Yujing Qingdao University of Science and Technology  
ZHU Weihao Qingdao University of Science and Technology  
ZENG Xiankui* Qingdao University of Science and Technology 1425373799@qq.com 
CHEN Shuangqing Qingdao AOTAI Transportation Equipment Co,Ltd  
Hits: 1154
Download times: 684
Abstract:
      Based on Moldflow software，orthogonal test and response surface method were used to optimize the design of injection molding simulation scheme of rubber outer windshield for high-speed train，and the injection molding process parameters were studied.The results showed that mold temperature was the most significant process factor affecting the volume shrinkage and shrinkage mark index of the rubber outer windshield during ejection，followed by melt（compound） temperature，packing time，packing pressure and injection time.The optimized injection process parameters were：mold temperature　185 ℃，melt temperature　65 ℃，injection time　160 s，parking time　14 s，parking pressure　110 MPa，at which the maximum volume shrinkage of the rubber outer windshield was 4.165%，and the maximum shrinkage index was 5.103%.
View Full Text   View/Add Comment  Download reader
Close