文章摘要
Finite Element Analysis on Key Parts of New Type of Rubber Crusher
Received:May 10, 2018  Revised:May 10, 2018
DOI：10.12136/j.issn.1000-890X.2019.05.0377
Key Words: rubber crusher；moving blade；rotor；finite element analysis
Author NameAffiliationE-mail
LI Li College of Mechanical and Electrical Engineering,Qingdao University of Science and Technology 917099717@qq.com 
YANG Linbin College of Mechanical and Electrical Engineering,Qingdao University of Science and Technology  
ZHANG Dewei* College of Mechanical and Electrical Engineering,Qingdao University of Science and Technology 917099717@qq.com 
WAN Chengcheng College of Mechanical and Electrical Engineering,Qingdao University of Science and Technology  
XIE Tian College of Mechanical and Electrical Engineering,Qingdao University of Science and Technology  
TIAN Qian College of Mechanical and Electrical Engineering,Qingdao University of Science and Technology  
Hits: 1814
Download times: 664
Abstract:
      Based on finite element analysis method，the moving blade edge angle of rubber crusher was investigated using ANSYS Workbench software.The results showed that the moving blade with 42° edge angle had best comprehensive performance，and met the strength requirement.The results of the first six mode modal analysis of the rotor showed that the rotating shaft of the crusher would not resonate at work and meet the using requirement.
View Full Text   View/Add Comment  Download reader
Close