文章摘要
Study on Structure and Properties of Standard rubber from Different Producing AreasLin Guang-yi1 ,Kong Ling-wei1,Jing Yuan1,Wang Xiang1,Wang Quan-jie1 Yu Xiao-dong1,
Received:May 08, 2017  Revised:May 08, 2017
DOI：
Key Words: Standard rubber;Processability;Tensile Strength;moisture resistance
Author NameAffiliationE-mail
Lin Guang-yi 青岛科技大学 机电工程学院 gylin666@163.com 
Kong Ling-wei* Qingdao University of Science and Technology 1129088361@qq.com 
Jing Yuan 青岛科技大学 机电工程学院  
Wang Xiang 青岛科技大学 机电工程学院  
Wang Quan-jie 青岛科技大学 机电工程学院  
Yu Xiao-dong 青岛科技大学 机电工程学院  
Zhu Lian-chao 上海诗董贸易有限公司  
Wu Lai-chun 上海诗董贸易有限公司  
Hits: 1589
Download times: 2018
Abstract:
      In this paper, in northern Thailand on the 20th standard rubber STR20 BD4, in southern Thailand on the 20th standard rubber STR20 BD2, Malaysia on the 20th standard rubber SMR 20 and Myanmar on the 20th standard rubber MSR 20 were studied.The results showed that In the composition, the raw rubber SMR 20 and STR20 BD2 addition to containing cis-polyisoprene, also contain small amounts of 3,4 structural units. The content of protein of the raw rubber SMR20 was the highest, and its antioxidant ability was the best; In terms of processability,SMR 20 has the best processability and the lowest gel content ,but STR20 BD4 has the worst processability. In the mechanical properties, SMR20 and STR20 BD4 tensile stress, tensile strength, wear resistance is better than MSR20, but the tear resistance is poor than MSR20. DMA test showed that SMR20 had the best moisture resistance, low rolling resistance and excellent dynamic mechanical properties.
View Full Text   View/Add Comment  Download reader
Close