文章摘要
Investigation of Extrusion-Rheology Properties on SBR/Silica/Silane
Received:January 13, 2017  Revised:January 13, 2017
DOI：
Key Words: Emulsion polymerized styrene butadiene rubber ; silica ; silane coupling agent ; extrusion rheological behavior
Author NameAffiliationE-mail
shijinfeng 青岛科技大学 橡塑材料与工程教育部重点实验室 shijf1990@163.com 
lijian 青岛科技大学 橡塑材料与工程教育部重点实验室  
sunchong 青岛科技大学 橡塑材料与工程教育部重点实验室  
dingxingwei 青岛科技大学 橡塑材料与工程教育部重点实验室  
zhangping* 青岛科技大学 橡塑材料与工程教育部重点实验室 zhangpzhsg1953@126.com 
Hits: 1371
Download times: 575
Abstract:
      The effect of silica content and types of silane coupling agents on extrusion and rheological properties of ESBR was investigated, and the grafting efficiency of the three kinds of silane was analyzed. The results showed that the non-Newton index of silica filled system was independent on its content at low shear rate. However, the non-Newton index of this system increased with increase of silica content at high shear rate. The viscosity and Payne effect of silica-Si747 filled system were the highest, and the appearance of extrudate was roughness, when the silica content was 40phr. However, the extrusion-temperature stability was better. The modification effect of Si69 and Si75 on silica was not different obviously.
View Full Text   View/Add Comment  Download reader
Close