文章摘要
Finite Element Analysis and Optimization on Frame of Solid Tire Curing Equipment
Received:October 12, 2016  Revised:October 20, 2016
DOI：
Key Words: solid tire；vulcanization equipment；frame；upper beam；side plate；finite element analysis
Author NameAffiliationE-mail
lixibin* Qingdao Institute of Polymer Research Institute of Mechanical Engineering 514496784@qq.com 
chenqian 青岛科技大学机电工程学院  
hanlu 青岛科技大学机电工程学院  
liucun 青岛科技大学机电工程学院  
lvbaiyuan 青岛科技大学机电工程学院  
Hits: 1160
Download times: 640
Abstract:
      The frame of solid tire curing equipment was analysed by finite element method，and the upper beam and side plate were reformed.Adding ribs in the box type cross beam and side plate jointing side tendons，the stress concentration problem of stiffening ring and rib plate was solved by means of fillet and material replacement.Optimization by orthogonal test，the designed cross beam thickness was 100 mm，beam height was 380 mm and rib plate thickness was 40 mm.Optimized frame material reduced by 9%，the service life of the equipment prolonged，the manufacturing cost reduced，and the performance improved.
View Full Text   View/Add Comment  Download reader
Close