| FEA on Steel Wire Braided Hydraulic Hose under Internal Pressure |
| |
| DOI： |
| Key Words: steel wire braided hydraulic hose；winding angle；internal pressure；finite element ana-lysis |
| Author Name | Affiliation | | LIU Jia-xin | Qingdao University of Science and Technology | | WANG Ze-peng | Qingdao University of Science and Technology | | DENG Tao | Qingdao University of Science and Technology |
|
| Hits: 858 |
| Download times: 518 |
| Abstract: |
| The finite element analysis ofΦ19 mm steel wire braided hydraulic hose under internal pressure was carried out by using Abaqus nonlinear finite element software.By changing the angles of inner and outer layers of steel wire，the deformation of hose body，tension of steel wire and stress distribution of a fixed-length hose under internal pressure were obtained.It was found that，when the angle was fixed and the internal pressure was over 10 MPa，the deformation of hose body and tension of steel wire increased linearly with increasing the internal pressure.When the angle of two inner layers of steel wire was fixed，the deformation of hose body and tension of steel wire decreased with in-creasing the angle of two outer layers of steel wire. |
|
View Full Text
View/Add Comment Download reader |
| Close |
