| Bladder Molding Technique of Natural Rubber Latex for Golf Club Head |
| |
| DOI： |
| Key Words: natural rubber latex；golf club head；bladder；molding technique |
| Author Name | Affiliation | | NAN Bo-hua | Shanghai Aerospace Equipments Manufacture | | SHAO Ding-wei | SGS-CSTC Standards Technical Services（Shanghai） Co.,Ltd |
|
| Hits: 743 |
| Download times: 5 |
| Abstract: |
| The effects of stability,film forming and molding parameters of natural rubber latex on the bladder molding for golf club head were studied，and the molding process was determined.First,the mold with coagulating agent was immerged in the latex for about 15 minutes as the thickness of latex film was about 1.0 mm.Then the mold with film was taken out of the latex,and put into the oven for about 1.5 h at 85 ℃.After that,the film was coated with a layer of talcum powder，and unloaded after 5 min at room temperature.In the final step,the film was dried for 1.5 h at 85 ℃ and then cured. |
|
View Full Text
View/Add Comment Download reader |
| Close |
