|
二维码（扫一下试试看！） |
| UG软件在26×4.0全地形自行车轮胎花纹设计及优化中的应用 |
| Application of UG Software in Design and Optimization for Tread Pattern of 26×4.0 All Terrain Bike Tire |
| |
| DOI： |
| 中文关键词: UG软件；全地形自行车轮胎；花纹设计 |
| 英文关键词: UG software；all terrain bike tire；pattern design |
| 基金项目: |
| 中图分类号:TQ336.1；O241.82 |
| Author Name | Affiliation | | NIE San-jun | Qingdao University of Science and Technology；Hangzhou Zhongce Rubber Co.,Ltd | | YANG Jin-lin | Zhejiang Sci-Tech University |
|
| Hits: 643 |
| Download times: 158 |
| 中文摘要: |
| 介绍UG软件在26×4.0全地形自行车轮胎花纹设计及优化中的应用。确定轮胎花纹的基本形式后，制定轮胎造型的基本流程，采用Auto CAD绘制轮胎花纹和轮胎断面曲线的二维图，再导入UG软件进行轮胎花纹3D建模，然后对花纹形式、花纹深度、花纹沟断面形状和花纹饱和度等进行优化设计，最后渲染出整条轮胎效果图。 |
| 英文摘要: |
| The application of UG software in the design and optimization for the tread pattern of 26×4.0 all terrain bike tire was introduced.The tire modeling was carried out after the basic pattern form of the tire was determined.Firstly,the two dimensional drawing of the tread pattern and cross sectional profile were acquired by using Auto CAD software,and then the 3D model of tread pattern was built by importing the two dimensional drawing in UG software.Finally,the pattern form,block depth,groove section shape and block/total ratio were optimized and the overall drawing was obtained. |
|
View Full Text
View/Add Comment Download reader |
| Close |
