文章摘要
本文二维码信息
二维码(扫一下试试看!)
钴盐用量对橡胶与钢丝帘线粘合性能的影响
Effect of Cobalt Boracyl Level on Adhesion between Rubber and Steel Cord
  
DOI:
中文关键词: 硼酰化钴;橡胶;钢丝帘线;粘合强度
英文关键词: cobalt boracyl;rubber;steel cord;adhesion
基金项目:
中图分类号:
Author NameAffiliation
Gai Xuefeng Yinchuan China Strategy( Great Wall) Rubber Company Ltd. 
Hits: 1022
Download times: 572
中文摘要:
      对硼酰化钴MC-23(钴质量分数为23%)用量(0.6~1.6份)对橡胶与钢丝帘线粘合性能的影响进行研究。采用的基本配方为:NR 100.0;炭黑N326 62.0;芳烃油 8.0;氧化锌 9.0;硬脂酸 0.5;防老剂4020 2.0;不溶性硫黄IS-7020 6.0;促进剂DZ 1.0;粘合剂RS 3.5;粘合剂A 2.3;沉淀法白炭黑 5.0。结果表明,随着钴盐用量的增大,在未老化、热空气老化及盐水老化条件下,胶料与钢丝的粘合强度有所提高;在湿热老化条件下,粘合强度由于热量和湿气的交互作用而发生较大幅度的下降,但钴盐用量在1.0份时粘合强度的下降为最小。综合胶料初始和老化后的应力-应变性能和粘合强度,以1.O份钴盐用量为最佳。
英文摘要:
      The effect of MC-23 cobalt boracyl (cobalt content ,23 %) level on the adhesion between rubber and steel cord was investigated in the following basic formula:NR 100.0;carbon black N336 62.0;aromatic oil 8.0;Zn0 9.0;stearic acid 0.5;antioxidant 4020 2.0,insoluble sulfur 6.0;accelerator DZ l.0;adhesive RS 3.5;adhesive A 2.3;precipitated silica 5.0.The results showed that the adhesion between rubber and steel cord increased under unaged,hot-air aging or brine aging conditions as the level of cobalt boracyl increased;the adhesion decreased significantly under heat-moisture aging condition. The optimum stress-strain properties and adhesion of the compound before and after aging could be obtained when l.0 phr of cobalt boracly was used.
View Full Text   View/Add Comment  Download reader
Close