| 宁卫明,蒋延华,周茂义,张 聪,郑涛.带束层角度对轿车子午线轮胎高速性能的影响[J].轮胎工业,2020,40(4):0216-0218 |
二维码（扫一下试试看！） |
| 带束层角度对轿车子午线轮胎高速性能的影响 |
| Effect of Belt Angle on High-speed Performance of Passenger Car Radial Tire |
| 投稿时间：2019-04-20 修订日期：2019-04-20 |
| DOI：10.12135/j.issn.1006-8171.2020.04.0216 |
| 中文关键词: 轿车子午线轮胎 带束层角度 高速性能 有限元分析 |
| 英文关键词: passenger car radial tire belt angle high speed performance finite element analysi |
| 基金项目: |
| 中图分类号: |
|
| 摘要点击次数: 1162 |
| 全文下载次数: 568 |
| 中文摘要: |
| 以235/45R18轿车子午线轮胎为例，采用Abaqus有限元分析软件建立子午线轮胎的力学仿真模型，研究带束层角度对轿车子午线轮胎高速性能的影响。结果表明，在20°～30°区间内，随着带束层角度的增大，轮胎的高速性能逐渐提高。成品轮胎室内转鼓试验证实了有限元分析结果的正确性。 |
| 英文摘要: |
| Taking 235/45R18 passenger car radial tire as an example，the mechanical simulation model of radial tire was established by using Abaqus finite element analysis software to study the effect of belt angle on high speed performance of passenger car radial tire.The results showed that the high speed performance of tire increased gradually with the increase of the belt angle in the range of 20°～30°.The results of the finite element analysis were verified by the drum test of finished tire. |
|
|
查看全文
查看/发表评论 下载PDF阅读器 |
| 关闭 |
