| 初坤龙,周君兰,吕伟,孙宗涛,张彦军.全钢载重子午线轮胎胎圈气泡的产生原因及改进措施[J].轮胎工业,2022,42(6):0369-0372 |
二维码（扫一下试试看！） |
| 全钢载重子午线轮胎胎圈气泡的产生原因及改进措施 |
| Cause Analysis of Bead Bubble of Truck and Bus Radial Tire and Corrective Actions |
| 投稿时间：2021-09-13 修订日期：2021-09-13 |
| DOI： |
| 中文关键词: 全钢载重子午线轮胎 胎圈气泡 排气线 成型辊压 半成品尺寸 |
| 英文关键词: truck and bus radial tire bead bubble exhaust line building roller size of semi-finished product |
| 基金项目: |
| 中图分类号: |
|
| 摘要点击次数: 927 |
| 全文下载次数: 582 |
| 中文摘要: |
| 分析全钢载重子午线轮胎胎圈气泡的产生原因并提出相应改进措施。施工设计及半成品尺寸不当、排气线完整性差、成型贴合压辊位置不合理及硫化模具钢圈排气线不通等均会导致胎圈气泡缺陷。经过优化施工设计、增加胎侧及加强层刺孔工艺、规范半成品尺寸过渡及成型辊压等措施能够有效减少胎圈气泡的产生，提高轮胎合格率。 |
| 英文摘要: |
| The causes of bead bubbles of truck and bus radial tire were analyzed and corresponding improvement measures were put forward.Inappropriateness of construction design and semi-finished product size，poor integrity of the exhaust line，unreasonable position of the building and laminating rollers，and unreasonable exhaust line of curing mold steel ring all led to the defect of bead bubbles.By optimizing the construction design，increasing the puncture process of the sidewall and reinforcement layer，standardizing the size transition of semi-finished products and building rolling，the generation of bead bubbles could be effectively reduced，and the qualification rate of finished tire could be improved. |
|
|
查看全文
查看/发表评论 下载PDF阅读器 |
| 关闭 |
