| 王超群,李德功,齐立平,吴洪全,常爱修.航空子午线轮胎成型工艺技术研究[J].轮胎工业,2021,(7):0405-0413 |
二维码（扫一下试试看！） |
| 航空子午线轮胎成型工艺技术研究 |
| Study on Building Process and Technology of Aviation Radial Tire |
| 投稿时间：2020-08-10 修订日期：2020-08-10 |
| DOI： |
| 中文关键词: 航空子午线轮胎 成型工艺控制 技术装备 |
| 英文关键词: aviation radial tire building process control technical equipment |
| 基金项目: |
| 中图分类号: |
|
| 摘要点击次数: 654 |
| 全文下载次数: 749 |
| 中文摘要: |
| The building process and technical equipment of aviation radial tire were introduced，and the key points of building process control were investigated.T＋2 building machine layout method was adopted in two-stage integrated building technology of aviation radial tire.The first stage building process included first stage inner liner lamination，first stage cord cylinder（turn-up plies） lamination，first stage cord cylinder（turn-in plies） lamination and die rubber lamination，and the second stage bulding process included belt spiral winding，corrugated protective layer lamination，tread lamination and drum shaping.The technical equipment of aviation radial tire is developing in the direction of specialization and differentiation. |
| 英文摘要: |
| Due to the harsh use conditions of Meridian aviation tires, special manufacturing equipment and manufacturing processes are required for development and production. Tire blank molding is a key process in the process, and its process layout is based on the "Meridian Aviation Tire " T-2 type molding machine layout method". In the process of production practice, process control must be strictly implemented in accordance with the relevant construction standards and operating norms, and at the same time put forward higher requirements for the level of technical equipment, the two promote each other, jointly promote the development of technical equipment towards specialization, differentiation, and gradually form a more mature meridian aviation tire molding complete equipment, technology technology. |
|
|
查看全文
查看/发表评论 下载PDF阅读器 |
| 关闭 |
