| 王慎平,武茂军,张永锋,傅相诚.12R22.5全钢轮胎成型机扇形块形状仿真优化[J].轮胎工业,2020,40(11):0643-0647 |
二维码（扫一下试试看！） |
| 12R22.5全钢轮胎成型机扇形块形状仿真优化 |
| Simulation and Optimization of Sector Block Shape of 12R22.5 All-steel Tire Building Machine |
| 投稿时间：2020-02-20 修订日期：2020-02-20 |
| DOI： |
| 中文关键词: 全钢轮胎 成型机 扇形块 有限元分析 优化 |
| 英文关键词: all-steel tire building machine sector block finite element analysis optimization |
| 基金项目: |
| 中图分类号: |
|
| 摘要点击次数: 872 |
| 全文下载次数: 726 |
| 中文摘要: |
| 针对12R22.5全钢轮胎出现的轮胎胎圈部位内凹和胎体帘线抽出等缺陷，利用有限元分析技术对成型机扇形块轮廓形状进行优化。通过扇形块参数调整使其横向压紧力、垂向压紧力和胎圈部位面积达到优化目标，使用优化后的扇形块提高了成型胎坯工艺质量和稳定性，同时延长了成型胶囊使用寿命。 |
| 英文摘要: |
| Aiming at the defects of the 12R22.5 all-steel tires such as the concave of the tire bead and the extraction of the carcass cord，the finite element analysis technology was used to optimize the contour shape of the building machine sector block．By adjusting the parameters of the sector block，the lateral compression force，vertical compression force and the bead area could reach the optimization target.The quality and stability of the green tire were improved and the service life of the building capsule were prolonged by the optimized sector block. |
|
|
查看全文
查看/发表评论 下载PDF阅读器 |
| 关闭 |
