| 罗乃良,许敏,叶之.芳纶浆粕在自行车轮胎防刺层中的应用[J].轮胎工业,2021,(4):0248-0251 |
二维码（扫一下试试看！） |
| 芳纶浆粕在自行车轮胎防刺层中的应用 |
| Application of Aramid Pulp in Anti-stab Layer of Bicycle Tire |
| 投稿时间：2020-02-19 修订日期：2020-02-19 |
| DOI： |
| 中文关键词: 自行车轮胎 防刺层 芳纶浆粕 增强 胎体强度 粘合性能 |
| 英文关键词: bicycle tire anti-stab layer aramid pulp reinforcement carcass strength adhesion |
| 基金项目: |
| 中图分类号: |
|
| 摘要点击次数: 709 |
| 全文下载次数: 412 |
| 中文摘要: |
| 研究芳纶短纤维防刺层自行车轮胎的结构设计、制备方法以及胎体强度和粘合性能的影响因素。结果表明：芳纶浆粕更适用于防刺层；随着芳纶浆粕用量的增大，胎体强度明显提高，但粘合性能下降；随着防刺层厚度的增大，胎体强度增大；在正常硫化区间内，胎体强度和粘合性能波动较小；但随着欠硫或过硫程度的增大，胎体强度和粘合性能的下降幅度较大。 |
| 英文摘要: |
| The structure design and preparation method of the bicycle tire with aramid short fiber anti-stab layer and the influence factor on the strength and adhesion of the carcass was studied.The results showed that aramid pulp was more suitable for the anti-stab layer.With the increase of dosage of aramid pulp，the strength of the carcass was significantly improved，but the adhesion decreased.With the increase of the thickness of the anti-stab layer，the strength of the carcass was improved.During the normal vulcanization time range，the strength and adhesion of carcass fluctuated in a smaller range；but as the degree of under-sulfur and over-sulfur increased，the strength and adhesion of carcass decreased significantly. |
|
|
查看全文
查看/发表评论 下载PDF阅读器 |
| 关闭 |
