| 李代强.混炼工艺对含白炭黑胎面胶性能的影响[J].轮胎工业,2020,40(11):0684-0687 |
二维码（扫一下试试看！） |
| 混炼工艺对含白炭黑胎面胶性能的影响 |
| Effect of Mixing Process on Properties of Silica Filled Tread Compound |
| 投稿时间：2019-12-30 修订日期：2019-12-30 |
| DOI： |
| 中文关键词: 白炭黑 胎面胶 混炼工艺 排胶温度 硅烷化反应 滞后性能 耐磨性能 |
| 英文关键词: silica tread compound mixing process discharging temperature silylation reaction hysteresis property wear resistance |
| 基金项目: |
| 中图分类号: |
|
| 摘要点击次数: 954 |
| 全文下载次数: 890 |
| 中文摘要: |
| 研究混炼工艺对含白炭黑的天然橡胶胎面胶硅烷化反应的影响，进而研究其对胶料各项性能的影响。结果表明：白炭黑与硅烷偶联剂的硅烷化反应温度集中在135～150 ℃区间内，随着有效硅烷化反应时间的延长，硫化胶的损耗因子减小，生热降低，滞后性能改善；当混炼温度达到150 ℃后，有效硅烷化反应时间对硫化胶的生热和滞后性能影响变小；白炭黑良好的硅烷化反应有利于提高硫化胶的耐磨性能。 |
| 英文摘要: |
| The effect of mixing process on silylation reaction of natural rubber tread compound was studied，and it effect on the properties of compound was studied.The results showed that the silylation reaction temperature of silica and silane coupling agent was concentrated in the range of 135～150 ℃.With the extension of effective silylation reaction time，the loss factor and the heat build-up of vulcanizate decreased，the hysteresis property improved.The effect of effective silylation reaction time on heat build-up and hysteresis properties of vulcanizates decreased at 150 ℃.The good silylation reaction of silica was beneficial to improve the wear resistance of vulcanizates. |
|
|
查看全文
查看/发表评论 下载PDF阅读器 |
| 关闭 |
