| 程继强,李凤威,郑艳,薛丹.钢丝帘布剥离力的影响因素分析[J].轮胎工业,2020,40(7):0441-0443 |
二维码（扫一下试试看！） |
| 钢丝帘布剥离力的影响因素分析 |
| Analysis of Factors Affecting Stripping Force of Steel Cord |
| 投稿时间：2019-02-26 修订日期：2019-02-26 |
| DOI：10.12135/j.issn.1006-8171.2020.07.0441 |
| 中文关键词: 全钢载重子午线轮胎 钢丝帘布 压延 剥离力 |
| 英文关键词: truck and bus radial tire steel cord calendering stripping force |
| 基金项目: |
| 中图分类号: |
|
| 摘要点击次数: 744 |
| 全文下载次数: 501 |
| 中文摘要: |
| 对比分析不同结构及工艺条件下钢丝帘布的剥离力。结果表明：5×0.35HI钢丝帘布剥离力明显高于3×4×0.22HE钢丝帘布；适当增大钢丝帘布的覆胶厚度有利于提高胶料在钢丝帘线中的渗透性能；随着压延速率的增大，钢丝帘布剥离力呈降低趋势；使用高门尼粘度胶料压延的钢丝帘布剥离力明显低于使用低门尼粘度胶料压延的钢丝帘布。 |
| 英文摘要: |
| The stripping force of steel cord under different structure and process conditions was analyzed. The results showed that the stripping force of 5×0.35HI steel cord was significantly higher than that of 3× 4×0.22HE steel cord；the permeability of the compound in the steel cord could be improved by increasing the calendered compound thickness；the stripping force of steel cord was decreased with the increase of calendering rate；the stripping force of steel cord with high Mooney viscosity compound was significantly lower than that of steel cord with low Mooney viscosity compound. |
|
|
查看全文
查看/发表评论 下载PDF阅读器 |
| 关闭 |
