| 汪燕,徐旗,于海洋,原明君,孙鲁,初晶晶.膏状胶片隔离剂对半钢钢丝附胶性能的影响[J].轮胎工业,2018,38(11):677-680 |
二维码（扫一下试试看！） |
| 膏状胶片隔离剂对半钢钢丝附胶性能的影响 |
| The influence of paste release agents on the properties of PCR Belt Coating |
| 投稿时间：2018-03-23 修订日期：2018-03-23 |
| DOI： |
| 中文关键词: 膏状隔离剂 胶片隔离剂 钢丝附胶 |
| 英文关键词: paste release agent rubber sheet release agent Belt Coating |
| 基金项目: |
| 中图分类号: |
|
| 摘要点击次数: 1218 |
| 全文下载次数: 334 |
| 中文摘要: |
| 探讨了不同厂家的膏状胶片隔离剂对半钢钢丝附胶性能的影响,并对浸入不同浓度膏状隔离剂乳液的半钢钢丝附胶进行各项性能对比,结果表明：TF-1隔离剂乳液浓度低于40%时,对半钢钢丝附胶物理机械性能无明显影响；JSH-2010-PG隔离剂乳液高浓度对半钢钢丝附胶物理机械性能无明显影响,但考虑加工安全性,JSH-2010-PG隔离剂正常使用时浓度应控制在5%以内。 |
| 英文摘要: |
| Discussed the influence of paste release agents from different manufacturers on the properties of PCR Belt Coating, and compared the properties of the PCR Belt Coating which immersed in different concentrations of paste release agent emulsion. The results showed that the TF-1 release agent which the emulsion concentration was lower than 40% had no significant influence on the physical and mechanical properties of PCR Belt Coating; while the JSH-2010-PG release agent which the emulsion concentration was high had no significant influence on the physical and mechanical properties of PCR Belt Coating, and the emulsion concentration of JSH-2010-PG release agent may be within 5% during production because of the safe processing. |
|
|
查看全文
查看/发表评论 下载PDF阅读器 |
| 关闭 |
|
|
|
