|
二维码（扫一下试试看！） |
| 轮胎钢丝帘布小角度裁断偏差产生原因及解决措施 |
| Causes and Countermeasures for Small-Angle Cutting Deviation of Steel Cord of Tire |
| Received:December 05, 2025 Revised:December 05, 2025 |
| DOI：10.12137/j.issn.2095-5448.2026.08.0457 |
| 中文关键词: 轮胎 钢丝帘布 小角度裁断 压延工艺 |
| 英文关键词: tire steel cord small-angle cutting calendering process |
| 基金项目: |
| 中图分类号: |
|
| Hits: 38 |
| Download times: 8 |
| 中文摘要: |
| 分析轮胎钢丝帘布小角度裁断偏差产生原因，并提出相应解决措施。通过优化压延工艺参数和裁断设备、规范操作流程及建立标准化管控体系，钢丝帘布裁断出现缺陷的频次显著降低，单卷钢丝帘布消耗从10～12 kg降至4 kg，过程损失得到有效管控，为轮胎生产提质降本提供技术支撑。 |
| 英文摘要: |
| The causes of small-angle cutting deviations of the steel cord of tire were analyzed，and the countermeasures were proposed.By optimizing calendering process parameters and cutting equipment，standardizing operational procedures，and establishing a standardized control system，the frequency of defects during steel cord cutting significantly decreased，the single-roll consumption of steel cord reduced from 10～12 kg to 4 kg，and the process loss were effectively controlled，which could provided technical support for improving tire production quality and reducing costs. |
|
View Full Text
View/Add Comment Download reader |
| Close |
