|
二维码（扫一下试试看！） |
| 耐热助剂和硫化助剂对丁腈橡胶耐热性能的影响 |
| Influence of Heat Resistant Additives and Curing Co-agents on the Heat Resistance of NBR |
| |
| DOI： |
| 中文关键词: 丁腈橡胶 耐热助剂 助交联剂 耐热性能 |
| 英文关键词: NBR heat resistant additives curing co-agents heat resistance |
| 基金项目: |
| 中图分类号: |
|
| Hits: 1325 |
| Download times: 929 |
| 中文摘要: |
| 研究耐热助剂氧化镁和甲基丙烯酸镁（MMG）、助交联剂三烯丙基异氰脲酸酯（TAIC）、N，N'-间亚苯基双马来酰亚胺（HVA-2）和硫黄对过氧化物硫化体系丁腈橡胶（NBR）耐热性能的影响。结果表明：氧化镁和MMG可以提高胶料的耐热性能，二者单用或并用的适合用量均为7～12份；助交联剂TAIC和HVA-2可以提高胶料的耐热性能，用量为1～2份较好；硫黄不适合用作过氧化物硫化的耐热NBR助交联剂。 |
| 英文摘要: |
| The influence of heat resistant additives， curing co-agents and sulfur on the heat resistance of NBR was investigated in this study. The heat resistant additives were magnesium oxide and magnesium methacrylate (MMG)， and the curing co-agents included triallyl isocyanurate (TAIC)， N， N'- m-phenylene bismaleimide (HVA-2). The experimental results showed that， the heat resistance of NBR could be improved by addition of heat resistant additives and their blend， and the optimum addition level is 7~12 phr. It could also be improved by 1~2 phr of co-agent TAIC， or HVA-2. However， sulfur was not effective to improve the heat resistance of peroxide cured NBR. |
|
View Full Text
View/Add Comment Download reader |
| Close |
