|
二维码（扫一下试试看！） |
| 动态热机械分析仪测试条件对轮胎胎面胶动态力学性能分析的影响 |
| Effect of Test Conditions of Dynamic Thermomechanical Analyser on Dynamic Mechanical Properties of Tread Compound |
| Received:September 21, 2018 Revised:September 21, 2018 |
| DOI：10.12137/j.issn.2095-5448.2019.11.0645 |
| 中文关键词: 动态热机械分析仪；胎面胶；玻璃化温度；损耗因子；升温速率；静态形变；动态形变 |
| 英文关键词: dynamic thermomechanical analyzer；tread compound；glass transition temperature；loss factor；heating rate；static deformation；dynamic deformation |
| 基金项目: |
| 中图分类号: |
| Author Name | Affiliation | E-mail | | SUN Lu* | Pulin Chengshan （Qingdao） Industrial Research and Design Co.，Ltd | sunluqingdao@163.com | | ZHANG Hongyang | Pulin Chengshan （Qingdao） Industrial Research and Design Co.，Ltd | | | XU Wenlong | Pulin Chengshan （Qingdao） Industrial Research and Design Co.，Ltd | | | YU Haiyang | Pulin Chengshan （Shandong） Tire Co.，Ltd | | | SUN Shiyue | Pulin Chengshan （Qingdao） Industrial Research and Design Co.，Ltd | | | XU Qi | Pulin Chengshan （Shandong） Tire Co.，Ltd | |
|
| Hits: 1256 |
| Download times: 294 |
| 中文摘要: |
| 研究动态热机械分析仪测试条件对胎面胶动态力学性能测试的影响。结果表明：升温速率过快，会导致玻璃化温度和损耗因子（tanδ）测试值偏大；预拉伸形变（静态形变）过大，会导致tanδ测试值偏差变大；动态形变过大，会导致胶料滞后效应明显，tanδ测试值偏大；测试胎面胶性能时，应选择较小动态形变；测试胎侧胶性能时，应选择较大动态形变。 |
| 英文摘要: |
| The effect of dynamic thermomechanical analyzer test conditions on dynamic mechanical properties of tread compound was studied.The results showed that the test values of glass transition temperature and loss factor （tanδ） were larger when the heating rate was too fast，too large pre-stretching deformation （static deformation） would lead to larger deviation of tanδ test values，and too large dynamic deformation would lead to obvious hysteresis effect of compound and larger tanδ test values.The smaller dynamic deformation should be chosen when testing tread compound performance，and the larger dynamic deformation should be chosen when testing sidewall compound performance. |
|
View Full Text
View/Add Comment Download reader |
| Close |
