文章摘要
数值模拟方法在橡胶注射成型中的应用研究
Numerical Simulation Study on Injection Molding of Rubber
  
DOI：
中文关键词: 橡胶  注射成型  反应粘度模型  反应动力学模型  硫化程度  数值模拟方法
英文关键词: rubber  injection molding  cross exponential model  reaction kinetics model  curing degree  numerical simulation method
基金项目:
作者单位
张惠敏 青岛科技大学 机电工程学院 
张聪 青岛科技大学 机电工程学院 
杨德 青岛科技大学 机电工程学院 
韩雷雷 青岛科技大学 机电工程学院 
摘要点击次数: 1000
全文下载次数: 543
中文摘要:
      应用数值模拟方法对橡胶注射成型过程进行研究，分析不同熔体温度和模具温度下橡胶的流动前沿温度、充填结束时的体积硫化率、硫化成型阶段的体积硫化率及硫化的均匀程度等，确定最佳工艺参数，从而在确保顺利充模、熔料汇合处无熔接痕、硫化程度和温度均匀分布及无残余应力等的前提下，缩短硫化时间，提高生产效率。
英文摘要:
      The rubber injection molding process was studied through numerical simulation method.Under different melt temperature and mold temperature，the flow front temperature，volume curing rates at the end of filling and during curing process，and vulcanization evenness were analyzed to determine the optimal process parameters.As a result，the mold filling process was smooth， there was no weld line in the material flow front，the curing degree and temperature field were uniformly distributed，and there was no residual stress in the molded article.Moreover，the curing time was shortened and production efficiency was improved.
Author NameAffiliation
ZHANG Hui-min Qingdao University of Science and Technology 
ZHANG Cong Qingdao University of Science and Technology 
YANG De Qingdao University of Science and Technology 
HAN Ｌei-lei Qingdao University of Science and Technology 
查看全文   查看/发表评论  下载PDF阅读器
关闭