基于PTMG-TDI的低游离TDI浇注型PU弹性体的制备与性能研究 |
Preparation and property of PTMG-TDI based castable polyurethane elastomer with low free TDI monomer |
|
DOI: |
中文关键词: 四氢呋喃均聚醚 甲苯二异氰酸酯 浇注型聚氨酯弹性体 低游离型 工艺性能 物理性能 动态性能 |
英文关键词: PTMG TDI castable polyurethane elastomer low free type processibility physical property dynamic property |
基金项目: |
|
摘要点击次数: 1149 |
全文下载次数: 0 |
中文摘要: |
以四氢呋喃均聚醚和甲苯二异氰酸酯为原料,采用分子蒸馏法合成PU预聚体,以3,3'-二氯-4,4'-二氨基二苯甲烷为扩链剂制备低游离甲苯二异氰酸酯浇注型PU弹性体,并对其性能进行研究。结果表明,与常规PU预聚体与扩链剂的混合体相比,低游离PU预聚体与扩链剂的混合体具有良好的流动性和较快的固化速度;低游离PU弹性体与常规PU弹性体拉伸强度和撕裂强度相差不大,但前者回弹值较大、压缩永久变形较小、动态性能较好。 |
英文摘要: |
Using PTMG and TDI as raw materials,a polyurethane(PU) prepolymer was synthesized by molecular distillation method,then a castable PU elastomer with low free TDI monomer was prepared with 3,3'-dichloro-4,4'diamino diphenylmethane chain extender,and its properties were investigated.The results showed that,the PU prepolymer and chain extender mixture possessed good flow behaviour and faster curing rate compared with general PU prepolymer;the tensile strength and tear strength were similar to those of general PU elastomer,but resilience was higher,compression set was lower and dynamic property was better. |
|
查看全文
查看/发表评论 下载PDF阅读器 |
关闭 |