文章摘要
EPDM接枝马来酸酐增韧聚酰胺6的性能及冲击断面形态
Properties of PA6 toughened with EPDM-g-MAH and study on its impact fracture surface
  
DOI：
中文关键词: 聚酰胺6  EPDM 接枝马来酸酐  共混物  增韧  力学性能  扫描电子显微镜
英文关键词: PA6  EPDM-g-MAH  blend  toughening  mechanical properties  SEM
基金项目:
作者单位
曾幸荣 华南理工大学高分子材料科学与工程系 
赵建青 华南理工大学高分子材料科学与工程系 
庞纯 华南理工大学高分子材料科学与工程系 
龚克成 华南理工大学高分子材料科学与工程系 
摘要点击次数: 765
全文下载次数: 738
中文摘要:
      研究了EPDM接枝马来酸酐（EPDM-g-MAH）用量对聚酰胺6（PA6）性能的影响及PA6/EPDM-g-MAH共混物的冲击断面形态。结果表明：EPDM-g-MAH分散相颗粒与PA6基体能形成牢固的结合，对PA6具有显著的增韧改性作用；当PA6/EPDM-g-MAH的用量比为90/10时，共混物的综合性能最理想，其常温（25 ℃）及低温（-20 ℃）下的冲击强度分别比纯PA6增大64.8%和106.6%，而且具有良好的挤出和注射成型加工性能。
英文摘要:
      The influence of EPDM-g-MAH addition level on the properties of PA6 was studied and the impact fracture surface of PA6/EPDM-g-MAH blend was investigated by SEM.The results showed that the EPDM-g-MAH particles of discontinous phase were firmly bound to PA6 matrix to give the latter a significant toughening effect；and when the blending ratio of PA6/EPDM-g-MAH was 90/10，the best comprehensive properties of the blend were obtained，its impact strengths at 25 ℃ and -20 ℃ were respectively higher than those of PA6 by 64.8% and 106.6%，and moreover，the blend had excellent processibility for extrusion and inject.
Author NameAffiliation
ZENG Xing-rong South China University of Technology 
ZHAO Jian-qing South China University of Technology 
PANG Chun South China University of Technology 
GONG Ke-cheng South China University of Technology 
查看全文   查看/发表评论  下载PDF阅读器
关闭