| 43×16.0R20无内胎航空子午线轮胎的设计 |
| Design of 43×16.0R20 Tubeless Aviation Radial Tire |
| 投稿时间：2024-12-13 修订日期：2024-12-13 |
| DOI：10.12136/j.issn.1000-890X.2026.06.0447 |
| 中文关键词: 子午线航空轮胎 无内胎轮胎 结构设计 施工设计 成品轮胎性能 |
| 英文关键词: aviation radial tire tubeless tire structure design construction design finished tire performance |
| 基金项目: |
|
| 摘要点击次数: 171 |
| 全文下载次数: 38 |
| 中文摘要: |
| 介绍43×16.0R20无内胎航空子午线轮胎的设计。结构设计：外直径 1 045 mm，断面宽度 370 mm，行驶面宽度 290 mm，行驶面弧度高 290 mm，胎圈着合直径 505 mm，胎圈着合宽度 340 mm，断面水平轴位置（H/1/H/2） 1.11，胎面采用4条纵向花纹沟设计，花纹深度 8.0 mm，花纹宽度 6.0 mm。施工设计：胎面采用定伸应力高的专用胎面胶，胎面下增设带束层粘合胶片和芳纶帘布波纹保护层，带束层采用14层920dtex芳纶帘布＋2300dtex锦纶66帘布，胎体采用6层2100dtex/3锦纶66帘布，钢丝圈为圆形截面，采用专用二次法成型机成型、蒸锅式双模定型硫化机硫化。成品轮胎的充气外缘尺寸、物理性能、爆破性能、静负荷性能和动态性能等均满足设计及国家标准要求。 |
| 英文摘要: |
| The design of 43×16.0R20 tubeless aviation radial tire was introduced.In the structure design，the following parameters were taken：overall diameter 1 045 mm，cross-sectional width?370 mm，width of running surface 290 mm，arc height of running surface 290 mm，bead diameter at rim seat?505 mm，bead width at rim seat?340 mm，maximum width position of cross–section（ H/1/H/2）?1.11，using 4 longitudinal grooves tread pattern，pattern depth?8.0 mm，pattern width 6.0 mm.In the construction design，the following processes were taken：using specialized tread compound with high tensile stress at a given elongation，adding adhensive rubber sheet for belt and an aramid cord corrugated protective layer under the tread，using 14-layer 920dtex aramid cord＋2300dtex nylon 66 cord for belt，using 6-layer 2100dtex/3 nylon 66 cord for carcass，using circular section steel bead ring，using a special two-stage building machine to build tire and a steam pot dual-mode vulcanizing machine to cure tire.The inflated peripheral dimention，physical properties，burst performance，static load performance and dynamic performance of fineshed tire all met the design and national standard requirements. |
|
|
查看全文
查看/发表评论 下载PDF阅读器 |
| 关闭 |
