| 芳纶浆粕补强炭黑/氟醚橡胶复合材料的研究 |
| Study on Carbon Black/Fluoroether Rubber Composites Reinforced with Aramid Pulp |
| 投稿时间：2023-08-23 修订日期：2023-08-23 |
| DOI：10.12136/j.issn.1000-890X.2023.12.0949 |
| 中文关键词: 氟醚橡胶 芳纶浆粕 热处理 物理性能 耐低温性能 |
| 英文关键词: fluoroether rubber aramid pulp heat treatment physical property low temperature resistance |
| 基金项目:贵州省科技支撑计划项目（黔科合支撑[2021]一般321） |
|
| 摘要点击次数: 532 |
| 全文下载次数: 630 |
| 中文摘要: |
| 研究芳纶浆粕对炭黑N990/氟醚橡胶复合材料的物理性能、微观结构和耐低温性能的影响，为高性能氟醚橡胶
复合材料的开发提供参考。结果表明：添加1份未经热处理芳纶浆粕和热处理芳纶浆粕的氟醚橡胶复合材料的硫化特性
和动态力学性能无明显变化，100%定伸应力、300%定伸应力、拉伸强度和撕裂强度提高；热处理芳纶浆粕在橡胶基体中
的分散性和与橡胶基体的界面粘接性较好，对氟醚橡胶复合材料的补强效果更为显著；添加1份未经热处理芳纶浆粕和
热处理芳纶浆粕对氟醚橡胶复合材料的耐低温性能影响较小，可在保持氟醚橡胶复合材料良好的耐低温性能的基础上提
高其物理性能。 |
| 英文摘要: |
| The effect of aramid pulp on physical properties，microstructures and low temperature
resistance of carbon black N990/fluoroether rubber composites was studied to provide reference for the
development of high performance fluoroether rubber composites.The results showed that there was no
significant change in the vulcanization characteristics and dynamic mechanical properties of the fluoroether
rubber composites with addition of 1 phr non-heat-treated aramid pulp and heat-treated aramid pulp.The
modulus at 100% elongation，modulus at 300% elongation，tensile strength and tear strength were increased.
The dispersion of heat-treated aramid pulp in the rubber matrix and the interfacial adhesion with the rubber
matrix were better，and the reinforcement effect of fluoroether rubber composites was more significant.
Addition of 1 phr non-heat-treated aramid pulp and heat-treated aramid pulp had little effect on low
temperature resistance of fluoroether rubber composites，and could improve their physical properties of
fluoroether rubber composites while maintaining the good low temperature resistance. |
|
|
查看全文
查看/发表评论 下载PDF阅读器 |
| 关闭 |
