| 胶囊式胎体自动贴合辅助工装的设计 |
| Design of Capsule Carcass Automatically Fitting Auxiliary Tool |
| 投稿时间：2023-08-15 修订日期：2023-08-15 |
| DOI：10.12136/j.issn.1000-890X.2025.01.0062 |
| 中文关键词: 胎体帘布 自动贴合 辅助工装 胶囊式 |
| 英文关键词: carcass drum automatically fitting auxiliary tool capsule |
| 基金项目: |
|
| 摘要点击次数: 328 |
| 全文下载次数: 120 |
| 中文摘要: |
| 针对特种轮胎成型胎体鼓两侧悬出胎体帘布宽度较大且没有支撑，无法实现自动贴合与滚压的问题，设计了胶囊式胎体自动贴合辅助工装。该辅助工装分左右两部分，分别安装在胎体鼓两侧主轴与尾座箱体主轴上，可以对胎体鼓两侧悬出胎体帘布进行支撑，与胎体鼓同步旋转，完成胎体帘布的自动贴合、滚压和反包，提高了轮胎成型质量和效率，极大地降低了工人劳动强度。 |
| 英文摘要: |
| Aiming at the problem that the width of hanging carcass cord fabric from both sides of the carcass drum was large and hanging carcass cord fabric had no support，so it was impossible to realize automatic fitting and rolling，a capsule carcass automatically fitting auxiliary tool was designed.The auxiliary tool was divided into two parts of the left and right，which were installed on the main axis on both sides of the carcass drum and the main axis of the tailstock box.It could support the hanging carcass cord fabric on both sides of the carcass drum，rotate synchronously with the carcass drum，complete the automatic fitting，rolling，and reverse wrapping of the carcass fabric，improve the forming quality and efficiency，and greatly reducing the labor intensities of workers. |
|
|
查看全文
查看/发表评论 下载PDF阅读器 |
| 关闭 |
