| 丁腈橡胶/聚氨酯复合材料用相容剂的合成及复合材料的性能研究 |
| Synthesis of Compatibilizers for NBR/PU Composites and Properties of Composites |
| 投稿时间：2022-03-10 修订日期：2022-03-10 |
| DOI：10.12136/j.issn.1000-890X.2023.06.0403 |
| 中文关键词: 相容剂 丁腈橡胶 聚氨酯 复合材料 拉伸强度 耐磨性能 |
| 英文关键词: NBR PU composite compatibilizer tensile strength abrasion resistance |
| 基金项目: |
|
| 摘要点击次数: 1223 |
| 全文下载次数: 1576 |
| 中文摘要: |
| 利用端羟基液体丁腈橡胶（HTBN）分别与二苯基甲烷二异氰酸酯（MDI）和对氯苯基异氰酸酯（4CPI）反应制备HTBN-聚氨酯（PU）和HTBN-4CPI两系列相容剂，研究其对采用机械共混法制备的丁腈橡胶（NBR）/PU复合材料性能的影响。结果表明：加入相容剂后，NBR和PU的相容性得到有效改善，NBR/PU复合材料的拉伸强度和储能模量增大，磨耗性能提高，当HTBN-4CPI质量分数为0.98%时，NBR/PU复合材料的拉伸强度和储能模量最大，磨耗性能最佳，其中拉伸强度增大35%，磨耗量减小56%。 |
| 英文摘要: |
| Two series of compatibilizers for nitrile rubber（NBR）/polyurethane（PU） composites
were prepared by the reaction of hydroxy-terminated liquid nitrile rubber（HTBN） with diphenylmethane
diisocyanate（MDI） and p-chlorophenyl isocyanate（4CPI），respectively，which were HTBN-PU and HTBN-
4CPI，and their effects on the properties of NBR/PU composites prepared by mechanical blending method
were studied. The results showed that the compatibility of NBR and PU was effectively improved with the
addition of the compatibilizers，the tensile strength and storage modulus of NBR/PU composites increased，
and the abrasion resistance was improved. When the mass fraction of HTBN-4CPI was 0. 98%，the tensile
strength and storage modulus of the NBR/PU composite were the largest，the abrasion resistance was the
best. Compared with the composites without compatibilizer，the tensile strength increased by 35% and the
abrasion loss was reduced by 56%. |
|
|
查看全文
查看/发表评论 下载PDF阅读器 |
| 关闭 |
