文章摘要
车辆稳态回转对轮胎热-力耦合响应的影响研究
Study on Influence of Vehicle Steady-state Cornering on Thermal-Mechanical Coupling Response of Tires
投稿时间:2022-02-05  修订日期:2022-02-09
DOI:10.12136/j.issn.1000-890X.2023.04.0243
中文关键词: 车辆  轮胎  稳态回转  热-力耦合响应  动力学仿真  温度场分布  有限单元法
英文关键词: vehicle  tire  steady-state cornering  thermal-mechanical coupling response  dynamic simulation  temperature field distribution  finite element method
基金项目:
作者单位E-mail
孟照宏* 1.青岛双星轮胎工业有限公司2.青岛轮云设计研究院有限责任公司 mengzhaohong0703@163.com 
史彩霞 青岛双星轮胎工业有限公司  
周 磊 青岛双星轮胎工业有限公司  
翟明荣 青岛轮云设计研究院有限责任公司  
于成龙 青岛轮云设计研究院有限责任公司  
庄 磊 青岛轮云设计研究院有限责任公司  
摘要点击次数: 1439
全文下载次数: 1002
中文摘要:
      研究车辆稳态回转对轮胎热-力耦合响应的影响。结果表明:车辆操纵稳定性测试前采用稳态回转暖胎时,定回转半径、不定车身侧向加速度工况下较定车身侧向加速度、不定回转半径工况下的轮胎整体温升梯度和幅值波动大;车辆稳态回转时,轮胎温度变化对车身侧向加速度波动非常敏感,左转向车辆车身侧向加速度增大与右侧轮胎分配负荷呈正相关变化,在复合侧偏侧倾作用下,能够加剧轮胎温升;暖胎引起轮胎温度的变化改变轮胎侧偏和纵滑等力学特性响应,造成非线性滑移区滞回幅值不稳定,易导致车辆操纵稳定性测试数据的重复性变差,进而对车辆动力学仿真验证和模型调整带来困难。本研究结果可为整车测试提供指导。
英文摘要:
      The influence of vehicle steady-state cornering on the thermal-mechanical coupling response of the tires was studied. The results showed that when the tires were warmed up by means of steady-state cornering before the vehicle handling stability test,the tire temperature gradient and amplitude fluctuation under the conditions of constant cornering radius and variable lateral acceleration of the vehicle body were larger than those under the conditions of constant lateral acceleration and variable cornering radius. During the vehicle steady-state cornering,the tire temperature change was very sensitive to the lateral acceleration fluctuation of the vehicle body. When the vehicle turned left,the increase of lateral acceleration was positively correlated with the load distribution of the right tire. Under the action of sideslip combined with camber condition,the tire temperature rise could be aggravated. The tire temperature change caused by warming up altered the response of mechanical properties such as tire sideslip and longitudinal slip,causing unstable hysteresis amplitude in the nonlinear slip zone,which easily lead to poor repeatability of vehicle handling stability test result,and thus brought difficulties to vehicle dynamic simulation verification and model adjustment. The results of this study could provide guidance for vehicle tests.
Author NameAffiliationE-mail
MENG Zhaohong 1.Qingdao Doublestar Tire Industry Co., Ltd2. Qingdao Lunyun Design and Research Institute Co.,Ltd mengzhaohong0703@163.com 
SHI Caixia Qingdao Doublestar Tire Industry Co., Ltd  
Zhou Lei Qingdao Doublestar Tire Industry Co., Ltd  
ZHAI Mingrong Qingdao Lunyun Design and Research Institute Co.,Ltd  
YU Chenglong Qingdao Lunyun Design and Research Institute Co.,Ltd  
ZHUANG Lei Qingdao Lunyun Design and Research Institute Co.,Ltd  
查看全文   查看/发表评论  下载PDF阅读器
关闭