| 橡胶冷喂料挤出机螺杆构型的发展状况 |
| Development Status of Screw Configurations of Cold Feed Rubber Extruder |
| 投稿时间：2021-12-21 修订日期：2021-12-21 |
| DOI：10.12136/j.issn.1000-890X.2023.04.0311 |
| 中文关键词: 橡胶 冷喂料挤出机 螺杆构型 螺棱 销钉机筒 塑化段 喂料段 混合 塑化 |
| 英文关键词: cold feed extruder screw configuration screw flight pin barrel plasticizing section feeding section mixing plasticizing |
| 基金项目:山东省重点研发计划（重大科技创新工程）项目（2020CXGC010312） |
|
| 摘要点击次数: 1057 |
| 全文下载次数: 1009 |
| 中文摘要: |
| 综述橡胶冷喂料挤出机螺杆构型的发展。在概述冷喂料挤出机基本螺杆构型的几何特点及混合和塑化能力的基础上，评述冷喂料挤出机螺杆塑化段的主副螺棱构型、中断和沟槽螺棱构型、销钉机筒构型、传递混合构型、凸耳螺杆构型的结构特征、混合和塑化原理以及喂料段的结构和特性，并预测未来冷喂料挤出机螺杆构型的发展趋势。 |
| 英文摘要: |
| In this article，the development of the screw configurations of cold feed rubber extruders
was reviewed. Firstly，the geometry features and mixing and plasticizing capability of the basic screw
configuration of the cold feed extruder were summarized. Then，the structural characteristics，mixing and
plasticizing principle of the plasticizing section with different screw configurations，including the main
and secondary screw flight configurations, interrupted and grooved screw flight configurations，pin barrel
configurations，transfer mixing configurations，and lug screw configurations，were discussed. Moreover，the
structure and characteristics of the feeding section of the cold feed extruder were also reviewed. In the last
part，the development trend of the screw configurations of the cold feed extruder in the future was predicted. |
|
|
查看全文
查看/发表评论 下载PDF阅读器 |
| 关闭 |
