| 电磁加热技术在橡胶硫化工艺中的应用研究 |
| Application of Electromagnetic Heating Technology in Rubber Vulcanization Process |
| 投稿时间：2020-10-29 修订日期：2020-10-30 |
| DOI：10.12136/j.issn.1000-890X.2022.02.0133 |
| 中文关键词: 电磁加热 硫化工艺 硫化模具 橡胶支座 硫化均匀性 节能 |
| 英文关键词: electromagnetic heating vulcanization process vulcanization mold rubber bearing vulcanization uniformity energy saving |
| 基金项目: |
|
| 摘要点击次数: 1557 |
| 全文下载次数: 987 |
| 中文摘要: |
| 针对橡胶模压硫化工艺的硫化模具加热，阐述普通加热（热板加热）硫化工艺中存在的问题和电磁加热硫化工
艺的优点，并分别对电磁加热硫化工艺与普通加热硫化工艺橡胶支座进行抗压性能和抗剪切性能试验。结果表明，电磁
加热硫化工艺充分解决了普通加热硫化工艺能量损耗大以及橡胶制品硫化时间长、硫化均匀性和性能稳定性差等问题，
能满足橡胶行业越来越高的环保要求。 |
| 英文摘要: |
| In view of vulcanization mold heating for rubber molding vulcanization process，the
problems in the ordinary heating （hot plate heating ） vulcanization process and the advantages of the
electromagnetic heating vulcanization process were discussed. The rubber bearings were produced by
using the electromagnetic heating vulcanization process and the ordinary heating vulcanization process，
respectively，and the compression resistance and shear resistance of the rubber bearings were tested and
compared. The results showed that，the electromagnetic heating vulcanization process fully solved the
problems of large energy loss，long vulcanization time，poor vulcanization uniformity and poor performance
stability of the rubber products in the ordinary heating vulcanization process，and could meet the increasing
high environmental protection requirements in the rubber industry |
|
|
查看全文
查看/发表评论 下载PDF阅读器 |
| 关闭 |
