| 编织胶管骨架层编织过程的导程和张力控制研究 |
| Study on Pitch and Tension Control of Braiding Process of Braided Hose Skeleton Layer |
| 投稿时间：2020-02-21 修订日期：2020-02-21 |
| DOI：10.12136/j.issn.1000-890X.2021.04.0254 |
| 中文关键词: 胶管 骨架层 编织 导程 张力 锭子 |
| 英文关键词: hose skeleton layer braid pitch tension spindle |
| 基金项目: |
|
| 摘要点击次数: 633 |
| 全文下载次数: 410 |
| 中文摘要: |
| 分析编织胶管骨架层编织过程中的结构受力，推导胶管骨架层编织导程和编织张力的计算公式，以确定胶管骨架层编织过程的重要参数。结果表明：在一定编织角下，保持编织导程恒定，可使胶管的径向和轴向膨胀平衡并保持结构稳定；编织张力呈周期性波动；锭子运行到轨道外圈附近时，编织张力最大，锭子运行到轨道内圈附近时，编织张力最小；锭子旋转放线一般发生在轨道外圈附近，放线后的编织张力波谷稍低于其他波谷。 |
| 英文摘要: |
| The structure force in the braiding process of the braided hose skeleton layer was analyzed，and the calculation formulas of the braiding pitch and braiding tension of the hose skeleton layer were derived，so as to determine the important parameters of the braiding process of the hose skeleton layer.The results showed that，under certain braiding angle，keeping the braiding pitch constant could keep the radial and axial expansion of the hose in balance and keep the structure stable.The braiding tension had the periodic fluctuation characteristics.When the spindle ran near the outer ring of the track，the braiding tension was the maximum，and when the spindle ran near the inner ring of the track，the braiding tension was the minimum.The spindle rotary setting out generally occurred near the outer ring of the track，and the braiding tension troughs after setting out were slightly lower than other troughs. |
|
|
查看全文
查看/发表评论 下载PDF阅读器 |
| 关闭 |
