酚醛树脂种类及用量对天然橡胶/溴化丁基橡胶高阻尼胶料性能的影响 |
Effect of Type and Addition Level of Phenolic Resin on Properties of High Damping NR/BIIR Compound |
投稿时间:2019-02-02 修订日期:2019-02-02 |
DOI:10.12136/j.issn.1000-890X.2019.11.0839 |
中文关键词: 热塑性酚醛树脂 热反应性酚醛树脂 天然橡胶 溴化丁基橡胶 高阻尼胶料 有效阻尼温域 |
英文关键词: thermoplastic phenolic resin thermosetting phenolic resin NR BIIR high damping compound effective damping temperature range |
基金项目:湖南省自然科学基金资助项目(2017JJ3530) |
|
摘要点击次数: 1462 |
全文下载次数: 695 |
中文摘要: |
研究酚醛树脂种类及用量对天然橡胶(NR)/溴化丁基橡胶(BIIR)高阻尼胶料性能的影响。结果表明:与采用热塑性烷基酚醛树脂203的胶料相比,采用热反应性辛基酚醛树脂HY-2045的胶料的硫化速率较快,邵尔A型硬度和拉伸强度较高,拉断伸长率略低,有效阻尼温域较宽;随着热反应性辛基酚醛树脂HY-2045用量的增大,胶料的有效阻尼温域呈现变宽的趋势,但高温区域(>0 ℃)的阻尼性能呈现下降的趋势。 |
英文摘要: |
The effect of the type and additive level of phenolic resin on the properties of high damping
NR/BIIR compound was investigated. The results showed that compared with those of the rubber compound
with thermoplastic phenolic resin 203,the curing rate of the rubber compound with thermosetting phenolic
resin HY-2045 was faster,the shore A hardness and tensile strength were higher,the elongation at break was
slightly lower,and the effective damping temperature range was wider. When the addition level of HY-2045
increased,the effective damping temperature range was broadened,while the damping in the high temperature
range(>0 ℃) decreased. |
|
查看全文
查看/发表评论 下载PDF阅读器 |
关闭 |