文章摘要
多联硫化机上横梁构型有限元分析及优化
Optimization and Analysis of Structure Type of Upper Beam for Multiple Curing Press Based on FEM
  
DOI：
中文关键词: 多联硫化机  上横梁  箱式构型  有限元分析  结构优化
英文关键词: multiple curing press  upper beam  box structure  FEM  structure optimization
基金项目:
作者单位
韩露 青岛科技大学 机电工程学院 
李溪斌 青岛科技大学 机电工程学院 
陈谦 青岛科技大学 机电工程学院 
刘存 青岛科技大学 机电工程学院 
吕柏源 青岛科技大学 机电工程学院 
摘要点击次数: 672
全文下载次数: 502
中文摘要:
      硫化机工作时上横梁是承受锁模力的关键部位，其强度和刚度不仅影响硫化机的寿命，而且影响锁模精度。采用ANSYS有限元分析软件对多联硫化机上横梁不同构型进行比较分析，在满足刚度和强度要求的基础上，经过结构改进和优化，上横梁总质量降低了22.8%，并降低了成本。
英文摘要:
      The upper beam was the key part to support the clamping force when the curing press was working，and its strength and rigidity not only affect the service life of curing press，but also affect the precision of mold-locking. The finite element analysis software ANSYS was used to comparatively analyze different structure type of upper beam for multiple curing press. After and the structure optimization，in the condition of meeting the requirements of material strength and stiffness，the total mass of the upper beam decreased by 22.8 percent and the cost was reduced.
Author NameAffiliation
HAN Lu Qingdao University of Science and Technology 
LI Xibin Qingdao University of Science and Technology 
CHEN Qian Qingdao University of Science and Technology 
LIU Cun Qingdao University of Science and Technology 
LYU Baiyuan Qingdao University of Science and Technology 
查看全文   查看/发表评论  下载PDF阅读器
关闭