| 轴/径向同时运动轮胎成型机成型鼓的设计与分析 |
| Design and Analysis of Building Drum of Tire Building Machine with Simultaneous Rotation and Axial Movement |
| 投稿时间：2018-10-24 修订日期：2018-10-24 |
| DOI：10.12136/j.issn.1000-890X.2019.09.0704 |
| 中文关键词: 成型机 成型鼓 轴/径向运动 有限元分析 |
| 英文关键词: building machine building drum axial/radial motion finite element analysis |
| 基金项目:山东省自然科学基金资助项目（ZR2016EEM45） |
|
| 摘要点击次数: 1462 |
| 全文下载次数: 900 |
| 中文摘要: |
| 对传统的轮胎成型机成型鼓进行改进，设计能够实现轴/径向同时运动的轮胎成型机成型鼓。采用SolidWorks
软件设计的轴/径向同时运动的轮胎成型机成型鼓由动力输入机构、内瓦驱动机构和外瓦驱动机构组成，对虚拟样机进
行实体装配和运动仿真，通过Ansys有限元分析对成型鼓驱动单元机构进行强度校核，验证了该设计的合理性和可行性。 |
| 英文摘要: |
| In this study，a new tire building drum with simultaneous rotation and axial movement was
designed based on improvement of the conventional building drum of tire building machine. The drum
structure was designed by using SolidWorks and composed of power input mechanism，inner-shell drive
mechanism and outer-shell drive mechanism. The virtual prototype was assembled and simulated. The
strength of building drum driving unit was verified by Ansys finite element analysis，which confirmed the
rationality and feasibility of the design. |
|
|
查看全文
查看/发表评论 下载PDF阅读器 |
| 关闭 |
