模压成型法PVG阻燃整芯输送带覆盖胶的配方优化 |
Formulation Optimization of Covering Compound of PVG Flame-retardant Integral Core Conveyor Belt by Molding Method |
投稿时间:2018-09-28 修订日期:2018-09-28 |
DOI:10.12136/j.issn.1000-890X.2019.01.0036 |
中文关键词: 覆盖胶 PVG阻燃整芯输送带 模压成型法 丁腈橡胶 聚氯乙烯树脂 配方优化 |
英文关键词: covering compound PVG flame-retardant integral core conveyor belt molding method NBR PVC formulation optimization |
基金项目:国家自然科学基金资助项目(50572088) |
|
摘要点击次数: 1672 |
全文下载次数: 878 |
中文摘要: |
对模压成型法PVG阻燃整芯输送带 [ 由聚氯乙烯树脂(PVC)阻燃整芯输送带表面贴合橡胶型覆盖胶制成 ] 覆盖胶进行配方优化。覆盖胶优化配方为:丁腈橡胶 100,PVC(糊状) 30,炭黑N234 40,硬脂酸 2,氧化锌 5,氯化石蜡/三氧化二锑/硼酸锌/聚磷酸铵/氢氧化铝 20/8/15/15/15,分散剂R50 5,增塑剂 20,防老剂 2,硫黄/促进剂TBBS1.7/1.8。优化配方覆盖胶与带芯粘合性能、物理性能、阻燃性能和滚筒摩擦试验结果达到MT 914—2008要求。 |
英文摘要: |
The formulation of the covering compound of PVG flame-retardant integral core conveyor belt which was made of PVC flame-retardant integral core conveyor belt with a covering compound by molding method was optimized. The optimum formulation of the covering compound was as follows:NBR 100,PVC(paste) 30,carbon black N234 40,stearic acid 2,zinc oxide 5,chlorinated paraffin/antimony trioxide/zinc borate/ammonium polyphosphate/aluminium hydroxide 20/8/15/15/15,dispersant R50 5,plasticizer 20,antioxidant 2,and sulfur/accelerator TBBS 1.7/1.8. The adhesion between the covering compound and the core,the physical properties,flame-retardant performance and drum friction test results of the optimized covering compound met the requirements of MT 914—2008. |
|
查看全文
查看/发表评论 下载PDF阅读器 |
关闭 |